KEWTECH Clampmeter Multimeter PAT Multifunction Installation Testers

Kewtech provide a range of testers and diagnostic instruments of proven reliability and accuracy.
Most of the products in the Kewtech range are manufactured by Japan's Kyoritsu Corporation, a long established company that has gained a worldwide reputation for producing robust, easy-to-use instruments that will give you years of reliable service at a price you can afford.
We consider the service and support function critical to the satisfaction of our customers and our long-term success. The Kewtech technical team is one of the industry's most experienced and best trained and capable of repairing and re-calibrating your instrument in the shortest possible time both within and outside of warranty periods.

Features
Functions	Phase rotation (Clockwise or Counter Clockwise), Presence of open phase
Detection Method	Electrostatic induction
Measuring Voltage Range	From 70 to 1000V AC phase to phase (sine wave, continuous input)
Clamp Diameter Range	From Ø2.4 to 30mm insulated cables
Measuring Frequency Range	45 to 66Hz
Phase Rotation	Clockwise: Green arrow LEDs 'rotate' in clockwise, Green symbol 'CW' lits, intermittent buzzer Counter Clockwise: Red arrow LEDs 'rotate' in counter clockwise, Red symbol 'CCW' lits, continuous buzzer
Visual Indication	Via LEDs with Super brightness function
Operation Conditions	Temperature/Humidity Ranges -10 to 50°C, 80% (no condensation)
Storage Conditions	Temperature/Humidity Ranges -20 to 60°C, 80% (no condensation)
Power Supply	Alkaline battery(LR6)x4 Continuous use: approx. 100 hours (auto power off in 10 min.)
Battery Voltage Warning	Power LED blinks if battery voltage is too low
Test Leads	Double insulated cables, lenght approx.
Colours Code	L1(U): Red L2(V): White L3(W): Blue
Applicable Standards	IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree2, IEC 61557-1, -7
Dimensions/Weight	112(L)x61(W)x36(D)mm / Approx. 380g
Accessories Included	9096(Carrying case), Alkaline battery(LR6)x4, Instruction manual

Features
Phase indicator designed to check the presence of open phase and phase sequence by rotating disk lamps Can check wide range of 3 phase power source from 110V to 600V	Colour coded to confirm with both old and new EU colour regulation Fuse leads with screw-in croc-clips

Features
Range	Insulation Resistance				Voltage Meansurement
	500V	1000V	2500V	5000V	AC/DC V
Measuring range	0.0 ~ 99.9MΩ 100 ~ 999MΩ	0.0 ~ 99.9MΩ 100 ~ 999MΩ 1.0 ~ 1.99GΩ	0.0 ~ 99.9MΩ 100 ~ 999MΩ 1.0 ~ 9.99GΩ 10.0 ~ 99.9GΩ	0.0 ~ 99.9MΩ 100 ~ 999MΩ 1.0 ~ 9.99GΩ 10.0 ~ 99.9GΩ 100 ~ 1000GΩ	(1TΩ) 30 ~ 600V AC/DC (50/60Hz)
Accuracy	+5%rdg ± 3dgt	+5%rdg ± 3dgt	+5%rdg ± 3dgt	+5%rdg ± 3dgt ±20% (100GΩ or more)	+2%rdg ± 3dgt
Short Circuit Current	1.3mA
Rated Test Current	1mA ~ 1.2mA	1mA ~ 1.2mA	1mA ~ 1.2mA	1mA ~ 1.2mA
Open Circuit Voltage	500V DC + 30% - 0%	1000V DC + 20% - 0%	2500V DC + 20% - 0%	5000V DC + 20% - 0%
Maximum Display	999 counts (1000 counts only at 1000GΩ)	630 counts	Current consumption	About 1000mA (during measurement)	25mA approx
Safety Standard	IEC 61010-1 CAT III 600V Pollution Degree 2
Power Supply	DC 12V: R14 x 8
Dimensions	205(L) x 152(W) x 94(D)mm
Weight	1.8kg approx.

Features

Large Color LCD display
Provide various power measurements including Power Quality Analysis
True RMS value can be displayed
Provide Dual Power Supply Systems for AC Power Source and Battery Operation
Rechargeable Ni-MH battery can be also used
Waveform and Vector display are switchable by touch pad key operation
Logging function for recording interval from 1 second up to 1 hour
1/2/5/10/15/20/30 seconds,
1/2/5/10/15/20/30 minutes, 1 hour
Storage data up to 1GB with compact flash card
Data download to PC through USB
(with set up & analysis software)
Fully comply with the latest International Safety Standards IEC61010-1 CAT.III 600V

Features
Earth Resistance Ranges	20Ω, 200Ω, 2000Ω
Earth Voltage Range	200V ac
Withstand Voltage	3700V ac for 1 minutes
Accuracy	±(1% + 4dgt) earth voltage range ±(2% + 1.0Ω) (20Ω range) ±(2% + 3dgt) (200Ω, 2000Ω ranges)
Dimensions	105 x 158 x 70mm
Weight	540g
Power Source	6x 1.5V AA

The KT71 is aimed at users of manual Pat testers and also offers the added convenience of automatic test sequences it couldn't be simpler.
A single position on the rotary dial indicates the type of test, for instance a Class I for IT equipment it couldn't be easier.
The start button starts the sequence and LEDs will indicate the state of each test. Green for pass-and red for fail it.couldn't be more straightforward.
The actual test result is also displayed for recording.

Features

Performs Earth bond at 200mA for IT appliances and high current at 20A for all other appliances
250V / 500V insulation test voltages
Run / leakage test
Single rotary dial position initiates test sequence
- Class I IT 200mA Earth Bond
- Class 120A Earth Bond
- Class II
- Extension lead test including polarity
LED indication of pass / fail as well as a result display
Automatic check if appliance is switched on or not.
Tests 110V appliances for earth bond and insulation (with appropriate test adaptor).
Tests in accordance with the IET (IEE) Code of Practice

The Kewtech KT72 PAT Tester is a new battery powered PAT tester from Kewtech. Of lightweight construction it is designed for one hand operation and with its automatic test sequences the Kewtech KT72 PAT Tester really makes PAT testing simple and hassle free. The rotary dial facilities easy indication to show if you are testing Class I equipment on 200mA (safe for all Class 1 appliances), Class II or either 250V or 500V (ideal for surge protected leads and appliances), or Extension Leads and IEC Leads.
The result for each PAT test will be shown on the display on the KT72 PAT Tester for record keeping, and four LED's will also light with a clear PASS or FAIL result on each individual test in either Green or Red. The Kewtech KT72 can even indicate a PASS result on appliances with extra long mains leads and long Extension or IEC Leads with an Amber LED flashing with the resistance is between 0.1 - 0.3 Ω.

Features

Performs Earth bond at 200mA at both +ve and -ve polarities (IT appliance safe)
250V / 500V insulation test voltages
Substitute leakage tests
Single rotary dial position initiates test sequence
Class I IT 200mA Earth Bond
Class II
Extension lead test including polarity
LED indication of pass / fail as well as a result display
Automatic check if appliance is switched on or not
Test 110V appliances for earth bond and insulation (with appropriate test adaptor).
Tests in accordance with the IEE Code of Practice
Powered by batteries

The Kewtech KT77 is a downloadable tester with a full QWERTY keyboard allowing rapid data entry for documenting and recording test results. The Kewtech KT77 is a durable and accurate Kewtech PAT Tester. The Kewtech KT77 offers a huge selection of features and functions which are guaranteed to meet all your PAT Testing requirements.
Capable of testing both 230V and 110V appliances the KT77 has fast data entry systems for documentation of test results, which can then be downloaded to your PC via the included USB stick or directly using a cable.
It features a novice mode which has help screens to guide you through your testing and an advanced mode which speeds up testing and maximises productivity, with the option to test manually or with automatic test sequences when using this great value Kewtech tester and you can programme test sequences to your own liking or use the preset test sequences.

Features

Full Tests for 230V appliances
Full Tests for 110V appliances
Standard and programmable test sequences
Sophisticated data capture with querty keyboard and fast recording systems
Fast versatile download via USB stick
Help screens
Expert and normal mode
Table of lead resistances
100 mA, 10A & 25A Continuity
250 / 500V Insulation
230V Earth leakage differential measurement
Substitute leakage
230V Touch leakage
Large clear display
Extension lead and IEC lead tests
Calibrated earth bond lead
Selectable pass limits
Uses high impact resistance rotomoulded case with room for test leads to provide for a self-contained tester
Tests in accordance with the IEE Code of Practice for in service inspection and testing of electrical equipment

Features

Auto ranging Continuity measurement to 2000Ω
250, 500 & 1000V Insulation test voltages
Loop impedance measurement to 2000Ω uses rolling average
PSC measurement to 20kA
16 RCD test current ranges
0 and 180° phase switch for optimum testing
Memory for test lead resistance compensation
Auto discharge
Displays mains voltage before test
Lock-down test button for 'hands-free' testing
Protected against phase to phase connection
Instant correct wiring status check
Complies with BS7671 (Part P)

The KT64 Multifunction Tester makes 'ease of use' it's top priority with such features as:- A single rotary dial to make your test selection. Non trip loop circuits with Anti-Trip Technology (ATT). Slim probe with test button as well as a lockdown option on the instrument for the most convenient hands free testing. The complete package is as important as the easy to use functions the KT64 comes with a lid, convenient neck strap, a soft carry case with additional room to carry other testing tools and the new 'super robust' Kewtech G7 test leads (fused and GS38 compliant). All designed to protect the instrument and make testing as easy as possible. The KT64 caters for all the essential testing requirements of BS7671 (16th edition) in Industrial, commercial and domestic (part P) properties.

Everything you need
The KT64 comes complete with everything you need for BS7671 (16th Edition Testing). A full set of new 'G7' fused test leads that includes a slim probe with a test button incorporated. This enables both hands to be free for testing. The G7 test leads have been subjected to a 21 point design criteria test which includes pull out and bending tests, as a result they are very robust and come with overmould at the gripping points. They comply fully with GS38. The instrument comes in a soft carry case which has extra room for testing accessories that the test engineer inevitably carries. The KT64 also comes with a quick reference guide attached to the inside of the integrated lid, and is supplied with an end of line calibration certificate which currently satisfies NICEIC / ECA requirements. The display is a superior fine pitch dot matrix type and is easy to read with the ability to display multiple information, for instance all the autotest RCD results on one screen.

Features

Easy to use
No tripping of RCDs during loop impedance tests
Test button in probe as well as lockdown test button for "hands free" testing
Easy PFC & PSC measurement without the need to alter test probes
Additional LED for warning of high voltage output in insulation test mode
Selectable touch voltage Backlit display
Auto-test for RCD testing with allresults shown on one screen, so no scrolling
Conducts phase to phase loop tests
Can be used with rechargeable batteries

The easiest to use Multifunction Tester - now with advanced memory, phase rotation and earth resistance

Easy interface
Fast loop (no trip)
RCD auto-tests results all on one screen
Advanced memory - able to assign type of test to results
Rugged construction with lid and carry case

The KT65 Multifunction Tester makes 'ease of use' it's top priority with such features as:- A single rotary dial to make your test selection. Non trip loop circuits with Anti-Trip Technology (ATT). Slim probe with test button as well as a lockdown option on the instrument for the most convenient hands free testing. The complete package is as important as the easy to use functions the KT65 comes with a lid, convenient neck strap, a soft carry case with additional room to carry other testing tools and the new 'super robust' Kewtech G7 test leads (fused and GS38 compliant). All designed to protect the instrument and make testing as easy as possible. The KT65 caters for all the essential testing requirements of BS7671 (17th edition) in Industrial, commercial and domestic (part P) properties.

Everything you need

The KT65 comes complete with everything you need for BS7671 (17th Edition Testing). A full set of new 'G7' fused test leads that includes a slim probe with a test button incorporated. This enables both hands to be free for testing. The G7 test leads have been subjected to a 21 point design criteria test which includes pull out and bending tests, as a result they are very robust and come with overmould at the gripping points.
They comply fully with GS38. The instrument comes in a soft carry case which has extra room for testing accessories that the test engineer inevitably carries. The KT65 also comes with a quick reference guide attached to the inside of the integrated lid, and is supplied with an end of line calibration certificate which currently satisfies NICEIC / ECA requirements. The display is a superior fine pitch dot matrix type and is easy to read with the ability to display multiple information, for instance all the autotest RCD results on one screen.

Features

Continuity Test with auto-null
250V, 500V, 1000V insulation test. LED shows when a high test voltage is present and when the circuit is still discharging
High and Low test current loop impedance - bypasses all types of RCDs
Separate PSC/PFC function with clear indication of which circuit is being measured
Comprehensive RCD function with Auto-test and Ramp
Phase rotation in line with the latest 17th edition requirements
Robust G7 test leads with GS38 probe tips and finger guards
Software and download lead included

The Kewtech KTD30 is a comprehensive Insulation / Continuity tester it provides for three insulation test voltages: 250V DC for SELV and PELV circuits 500V DC for circuits up to and including 500V and 1000V for circuits above 500V.
The 200mA continuity test has a auto-null feature for the resistance of the test leads. This can null out up to 2Ω so caters for long extension leads used in R2 testing.
In both insulation and continuity function there is a 'hands free' mode. When sets the instrument will measure whatever is across its test probes. This save the user having to connect probes and then have a hand free to press the test button.
A live circuit warning is provided for when live circuits are inadvertently left on before the commencement of a test.
See pdf file for full specifications.

Features
250, 500 & 1000V insulation test Continuity up to 10 Ω Auto null function up to 2Ω ( caters for long test lead extensions) 'Hands free' mode Live circuit warning Protected against accidental live voltage contact Auto-shut off to preserve battery life Excellent battery life over 5000 tests from only four batteries.

The Kewtech KTD40 uses the latest in electronic design to produce a compact and feature packed test instrument. For instance it includes a full socket tester that will check for any mis-wiring at the socket. It will also check for the very hazardous condition of a reversal of line/neutral at the supply.
This instrument is capable of measuring true loop impedance, this gives more relevant information when testing PSC/PFC as the reactance of the suppliers transformer measured as well as the pure loop resistance.
With the optional distribution loop test a high current two wire test can be carried out. A high or low current (non trip) test is conducted and after the reading is displayed the PFC or PSC can be shown instantly on the press of a second button.
See pdf file for full specifications.

Features

Low current non trip and high current loop impedance (Patented)
High current test reads true loop impedance (including the supply transformers reactance)
Full socket tester functionality built in
Unique mains supply polarity test (checks that line and neutral are not switched at the supply
Instant readout of PFC/PSC by use of secondary button
Voltage test function L-N, L-E & N-E
Fully protected against accidental to phase to phase protection

The Kewtech KTD50 is a comprehensive RCD tester that tests type AC and ACS RCDs from 30mA to 500mA (see specifications pdf). Special RCD features include an auto, ramp and x 2 I ΔN test.
In the auto-test mode the instrument automatically runs through all the six standard tests whilst the operator only has to stand by the RCD and reset it every time it trips. All the results can be viewed using the recall button.

The ramp test slowly increases tripping current until the RCD trips. The display is in mA. It will show up RCDs that are out of specification and those that will be susceptible to nuisance tripping. It can also be used to indicate which circuits have high leakage currents. The x 2 I ΔN test satisfies the advisory note for verification of disconnection times as in the 17th Edition regulation 411.3.2.2 The Kewtech KTD50 also measures mains voltage and incorporates a full socket tester that checks for 18 socket wiring conditions. Last but not least this tester has the unique feature of a mains polarity test. It will check that the mains incoming supply is not in the very hazardous condition of line/phase reversal.

Features
Comprehensive RCD tester Includes RCD ramp and auto-test Full socket tester functionality built in Unique mains supply polarity test (checks that line and neutral are not switched at the supply) Measures mains voltage Special x 2 I ΔN RCD function Tests selective RCDs

Features
20/200/2000Ohms Loop test ranges PSC measurement to 20kA Earth probe for testing exposed metalwork	Fully protected against phase to phase connection Colour LED's for instant check of correct wiring status Complies with BS 7671 17th edition wiring regulation

The Kewtech KT42 non trip loop tester, will not trip passive RCDs, and wiull make a PSC measurement up to 20kA, with a lock-down test button for hands-free testing. Also an option for an external earth probe to test bonded metal work.
Featuring Anti Trip Technology

Features
Loop Test PSC Measurement to 20kA Complies with BS 7671/17th Edition wiring regulations Supplied with all relevant test leads	Colour coded LED's for instant check of correct wiring status Earth probe for testing exposed metal work Anti-trip technology (test without tripping passive RCD's)

Features
NEW Anti-Trip Technology for full no trip LOOP testing on all RCD types 15mA low current - soft LOOP test Noise override button for high current LOOP test 20, 200 & 2000Ω Loop measurement ranges PSC measurement up to 20kA	Displays mains voltage before test Lock-down test button for hands free testing Protected against phase to phase connection Instant correct wiring status check Complies with BS7671 (Part P)s

The Kewtech FC2000 Calibration Checkbox allows electricians to check their own 17^th Edition test equipment and ensure that all meters are operating correctly and accurately. The Kewtech FC2000 Calibration Check Box doesn't replace the calibration requirements of testers but provides a quick and simple way to check instrument accuracy, reducing the risk of incorrect certification.

Features

Tests all good quality makes of Loop, RCD, Insulation, Continuity and Multifunction testers
Validate your test instruments regularly with self calibration checks
12 comprehensive test points covering Loop, RCD and Insulation/Continuity
Null facility to remove lead resistance
Supplied with an End of Line Calibration Certificate
Quick and simple way to check the accuracy of your electrical installation test meters

The FC3000 Calibration Check Box is for use by electricians with their test equipment. Many certification bodies now require their members to self check their own test instruments regularly to ensure their ongoing accuracy, a calibration checkbox has become an invaluable piece of equipment. By self checking your instruments with the Kewtech FC3000, you can comply with any requirements and have the peace of mind that your instrument is giving accurate readings on all of your electrical installations.

Key Features

Checks all makes of: Loop, Insulation/continuity & RCD testers.
Complies with BS EN 61557 & BS EN 61010 (Test instrument requirements for 17th Edition)
Continually validate your instruments though regular self calibration checks
Reduces expensive calibration costs
Null facility to remove lead resistance
Six insulation check levels (Plus checks 17th edition correct output)
Five continuity check levels (Plus checks 17th edition correct output)

Three loop check levels
Five checks covering 30mA and 100mA RCDs
Checks RCD over current test
Easy to use
Tough drop proof watertight case
Comes with Full Calibration Certificate
Lightweight: 2.5Kg

The Kewtech Loopcheck 106 socket tester checks the important parameters for safe wiring, and gives a cost effective solution in the hands of many more users at the front end of responsibility and care.
Traditional socket testers check for the correct polarity at the socket outlet under test. They can tell if the earth path is missing but cannot check whether the path is of good enough quality to be safe.
The loopcheck 106 does. . . . . . . .

Operation is easy. After being inserted in to a socket the loopcheck 106 will automatically run a wiring check, green LEDs will light and a continuous tone indicate a satisfactory result. Any faults will be highlighted by red and orange LEDs and a warble tone.
The LEDs are positioned to represent the polarity of the pins. This gives another quick visual indication of where the fault lies.
Having determined the socket polarity is good the tester will then test for the quality of the earth loop.
This test is conducted at mains frequency. One of three different colour LEDs will light indictating the condition of the earth loop return path.

The Kewtech Loopcheck 107 socket tester checks the important parameters for safe wiring, and gives a cost effective solution in the hands of many more users at the front end of responsibility and care.
Traditional socket testers check for the correct polarity at the socket outlet under test. They can tell if the earth path is missing but cannot check whether the path is of good enough quality to be safe.
The loopcheck 107 does. . . . . . . . .

Operation is easy. After being inserted in to a socket the loopcheck 107 will automatically run a wiring check, green LEDs will light and a continuous tone indicate a satisfactory result. Any faults will be highlighted by red and orange LEDs and a warble tone.
The LEDs are positioned to represent the polarity of the pins. This gives another quick visual indication of where the fault lies.
Having determined the socket polarity is good the tester will then test for the quality of the earth loop.
This test is conducted at mains frequency. One of three different colour LEDs will light indictating the condition of the earth loop return path.
The loopcheck 107 also has the ability to check for the correct polarity of the mains supply. If this is wrong then a very hazardous situation exists. By touching the left hand touch pad the correct polarity of the mains supply is verified. The right-hand test button puts out a measured tripping current to check the operation of 30mA RCDs.

Features
Outputs 690V AC/DC using just two contacts points for AC and DC. Continuity test for fused test leads using a 4mm connectors.	Magnetic base for conveinece to mount on metal panels. Makes a perfect partner to the KEW 1700/ KEW 1710 voltage testers.

Features
Display: 4000 counts Meets IEC 61010-1 CAT.III 300V REL function checks difference of measured values Auto power off function Resistance range provides audible continuity test	Data hold function Diode test feature Direct current measurement up to 10A AC and DC Capacitance test feature

Features

Measures up to 600V AC/DC
Measures DC current up to 300mA
High sensitivity DC 20k?/volts
Polarity selector switch
Continuity buzzer
Battery check
LED check
Drop-proof from one metre
Temperature measurement (with KEW7060 temperature probe)

Features
Voltage Tester measuring up to 690V AC/DC Continuity tester with LED and Buzzer Phase rotation indicator Single pole phase indicator Live circuit warning LED GS 38 reduced metal probed tips	Pen light function for use in dark spaces Auto power OFF Polarity test Low battery warning Complies with BS7671

The Kewtech Fuse Finder consists of a transmitter, receiver plus mains and fused test lead set.
Transmitter connects to the circuit to be traced by either the mains lead or fused test lead set. The transmitter is powered from the supply so does not need batteries. It injects a signal into the circuit that is then picked up by the receiver at the fuse board.
Receiver this cleverly auto-tunes when scanning a bank of fuses / mcbs. At least two scans are required so that the receiver can adjust its sensitivity to detect the strongest signal and hence the correct fuse for the circuit under test.
LEDs clearly indicate signal strength and an auto power off maximises battery life.

The KEWVOLT 2 tester has been designed to be easy to use and give a clear indication of the voltage present.
Firmly place the content tips of the two probes on the voltage source being measured. The LED's indicate the voltage present.

The ideal security combination lock to keep that circuit safe.
Stop unwanted access to particular circuits that are being worked on, or simply not required to be used.
Will fit most MCBs and toggle mains switches.
No keys to lose with the combination lock facility.

Features
Fits most MCBs and toggle mains switches Easy to use combination lock no keys to use Easy to set combination lock for memorable combination number Saves having multi piece lock out kits Comes with two warning labels that can be secured to the shackle and give user information

The Kewtech KEWPV1 is an irradiance meter designed for measuring he efficiency of photovoltaic solar panels. The high accuracy Kewtech KEWPV1 Solar Irradiance Meter can carry out rapid response sampling and is capable of measuring up to 1999w/m2 making it ideal for the solar panel installation electrician.

Specifications
Range	1999 W/m2, 634 BTU
Resolution	1 W/m2, 1 BTU
Sampling time	Approx: 0.25 s
Display	3 ½ digit LCD with maximum reading of 1999
Accuracy	+/- 10 W/m2 / (+/- 3BTU) or +/- 5% whichever is greater. Plus temperature influence +/- 0.38 W/m2/°C
Over range display	OL
Operating range	5 ºC to 40 ºC, below 80% RH
Storage range	-10 ºC to 60 ºC, below 70% RH
Size	162 mm (L) x 63 mm (W) x 28mm (H)
Weight (inc. batteries)	Approx 250g

Features

0 to 40,000 Lux x 0.1
Auto Ranging over 4 ranges
Measures both Lux and Foot-Candles (FC)
High accuracy and rapid response sampling 2.5 times per second
Silicon photo diode sensor
Colour correction filter and cosine correction lens
26mm LCD display with Backlight
Max Hold displays the highest reading since power on
Auto Power Off after 17minutes of no activity
Low Battery Indication
Impact-resistant ABS case
Supplied with protective lens cap and battery

Features

Measuring range 40 to 130dB x 0.1dB
'A' frequency weighting
Fast time response weighting
Precision ½ inch electret condenser microphone
26mm LCD display with function indicators
Display updates every 0.5 seconds
Auto Backlight in dark environments
Max/Min Hold of measured values
'Over' display for out-of-range input
Auto Power Off after 15 minutes, preserves battery life
Low Battery indicator
Can be tripod mounted
Supplied with wind muffler & battery

Features
1.1 to 30m/sec Selectable measurement units: m/s, fpm, mph, km/hr or knots Sapphire jewel bearing ensures fast and accurate readings 26mm LCD display with Backlight and function indicators Max Hold since power on Average Hold since power on Auto Power Off after 15 minutes of no activity Low Battery indication Supplied with battery

Features

Enables easy Pat Testing with an Insulation / Continuity Tester or a Multifunction Tester. Covers all the mandatory tests demanded by the Code of Practice.
Class1:
Earth Bond using a continuity tester - this can be used for all appliances (including IT)
Insulation at 500V or 250V using an Insulation Tester
Class2:
Insulation at 500V or 250V using an Insulation Tester
Tests extension leads (in conjunction with the Kewtech R2)
The new Code of Practice allows for 250V insulation tests. This can be a replacement for leakage tests in most cases
Works with all testers that use 4mm test leads including Megger and Fluke