|
| |
Kewtech KT61 17th Edition Digital Loop, RCD, Insulation/Continuity Tester Data[Read More]
 [Read Less]
- Continuity measurement to 200Ω
- Insulation measurement to 200MΩ at 500V
- Loop impedance measurement to 2000Ω
- uses rolling average 11 RCD test current ranges
- 0 and 180° phase switch for optimum testing
- Displays mains voltage before test
- Lock-down test button for hands-free testing
- Protected against phase to phase connection
- Instant correct wiring status check
- Complies with BS7671 (Part P)
|
| Features |
- Continuity Test
- Insulation Test
- Loop Test
- RCD
- Complies with BS 7671/17th Edition wiring regulations
- Supplied with all relevant test leads
- Colour coded LED's for instant check of correct wiring status
- Carry case
|
Kewtech KT62 Digital Loop, PSC, RCD, Insulation/Continuity TesterData[Read More]
 [Read Less]
- Continuity Test
- Insulation Test
- Loop Test
- PSC Measurement to 20kA
- RCD
- Complies with BS 7671/17th Edition wiring regulations
- Supplied with all relevant test leads
- DC test for RCD's
- Colour coded LED's for instant check of correct wiring status
- Carry case
|
| Features |
- Auto ranging Continuity measurement to 2000Ω
- 250, 500 & 1000V Insulation test voltages
- Loop impedance measurement to 2000Ω uses rolling average
- PSC measurement to 20kA
- 16 RCD test current ranges
- 0 and 180° phase switch for optimum testing
- Memory for test lead resistance compensation
- Auto discharge
- Displays mains voltage before test
- Lock-down test button for 'hands-free' testing
- Protected against phase to phase connection
- Instant correct wiring status check
- Complies with BS7671 (Part P)
|
Kewtech KT63 Multifunction 5-1 TesterData[Read More]
 [Read Less]
The Kewtech KT63 easy to use 5 in 1 Multifunction tester is a must for all those testing jobs that requires cost effective quality. The KT63 has new Anti Trip technology loop testing providing full no trip testing on RCDs of all types.
It displays PFC/PSC as the same time as the loop reading, with a single rotary dial for function selection. Hand-free mode is controlled by separate button
| Features |
- Easy to use
- New Anti Trip Technology loop test - for full no trip Loop testing on RCDs of all types. Low susceptibility of RCD uplift and noise interference
- Displays PFC/PSC at same time as Loop reading
- 50 / 500 / 1000V insulation test with auto discharge
- Test leads auto-null for continuity mode
- RCD auto test mode for 30mA RCDs
- RCD ramp test function
- IP54
- End of line calibration certificate included
- Hand-free mode controlled by separate button
- Single rotary dial for function selection
- Mains polarity test
|
Kewtech KT64 Multifunction TesterData[Read More]
[Read Less]
The KT64 Multifunction Tester makes 'ease of use' it's top priority with such features as:- A single rotary dial to make your test selection. Non trip loop circuits with Anti-Trip Technology (ATT). Slim probe with test button as well as a lockdown option on the instrument for the most convenient hands free testing. The complete package is as important as the easy to use functions the KT64 comes with a lid, convenient neck strap, a soft carry case with additional room to carry other testing tools and the new 'super robust' Kewtech G7 test leads (fused and GS38 compliant). All designed to protect the instrument and make testing as easy as possible. The KT64 caters for all the essential testing requirements of BS7671 (16th edition) in Industrial, commercial and domestic (part P) properties.
Everything you need
The KT64 comes complete with everything you need for BS7671 (16th Edition Testing). A full set of new 'G7' fused test leads that includes a slim probe with a test button incorporated. This enables both hands to be free for testing. The G7 test leads have been subjected to a 21 point design criteria test which includes pull out and bending tests, as a result they are very robust and come with overmould at the gripping points. They comply fully with GS38. The instrument comes in a soft carry case which has extra room for testing accessories that the test engineer inevitably carries. The KT64 also comes with a quick reference guide attached to the inside of the integrated lid, and is supplied with an end of line calibration certificate which currently satisfies NICEIC / ECA requirements. The display is a superior fine pitch dot matrix type and is easy to read with the ability to display multiple information, for instance all the autotest RCD results on one screen.
| Features |
- Easy to use
- No tripping of RCDs during loop impedance tests
- Test button in probe as well as lockdown test button for "hands free" testing
- Easy PFC & PSC measurement without the need to alter test probes
- Additional LED for warning of high voltage output in insulation test mode
- Selectable touch voltage Backlit display
- Auto-test for RCD testing with allresults shown on one screen, so no scrolling
- Conducts phase to phase loop tests
- Can be used with rechargeable batteries
|
Kewtech KT65 Multifunction TesterData[Read More]
 [Read Less]
The easiest to use Multifunction Tester - now with advanced memory, phase rotation and earth resistance
- Easy interface
- Fast loop (no trip)
- RCD auto-tests results all on one screen
- Advanced memory - able to assign type of test to results
- Rugged construction with lid and carry case
|
The KT65 Multifunction Tester makes 'ease of use' it's top priority with such features as:- A single rotary dial to make your test selection. Non trip loop circuits with Anti-Trip Technology (ATT). Slim probe with test button as well as a lockdown option on the instrument for the most convenient hands free testing. The complete package is as important as the easy to use functions the KT65 comes with a lid, convenient neck strap, a soft carry case with
additional room to carry other testing tools and the new 'super robust' Kewtech G7 test leads (fused and GS38 compliant). All designed to protect the
instrument and make testing as easy as possible. The KT65 caters for all the essential testing requirements of BS7671 (17th edition) in Industrial,
commercial and domestic (part P) properties. Everything you need
The KT65 comes complete with everything you need for BS7671 (17th Edition Testing). A full set of new 'G7' fused test leads that includes a slim probe
with a test button incorporated. This enables both hands to be free for testing. The G7 test leads have been subjected to a 21 point design criteria
test which includes pull out and bending tests, as a result they are very robust and come with overmould at the gripping points.
They comply fully with GS38. The instrument comes in a soft carry case which has extra room for testing accessories that the test engineer inevitably
carries. The KT65 also comes with a quick reference guide attached to the inside of the integrated lid, and is supplied with an end of line calibration
certificate which currently satisfies NICEIC / ECA requirements. The display is a superior fine pitch dot matrix type and is easy to read with the ability to
display multiple information, for instance all the autotest RCD results on one screen.
| Features |
- Continuity Test with auto-null
- 250V, 500V, 1000V insulation test. LED shows when a high test voltage is present and when the circuit is still discharging
- High and Low test current loop impedance - bypasses all types of RCDs
- Separate PSC/PFC function with clear indication of which circuit is being measured
- Comprehensive RCD function with Auto-test and Ramp
- Phase rotation in line with the latest 17th edition requirements
- Robust G7 test leads with GS38 probe tips and finger guards
- Software and download lead included
|
|
