Fluke 718Ex Pressure Calibrator - Free Certificate

Instruments
Fluke 718Ex 1G I.S. Pressure Calibrator (68.9 mbar)
Fluke 718Ex 30G I.S. Pressure Calibrator (2 bar)
Fluke 718Ex 100G I.S. Pressure Calibrator (7 bar)
Fluke 718Ex 300G I.S. Pressure Calibrator (20 bar)

Modules
Fluke 700P01Ex Differential Pressure Module (25 mbar)
Fluke 700P24Ex Differential Pressure Module Wet (1001 mbar)
Fluke 700P05Ex Gauge Pressure Module (2 bar)
Fluke 700P06Ex Gauge Pressure Module (7 bar)
Fluke 700P27Ex Gauge Pressure Module (20 bar)
Fluke 700P09Ex Gauge Pressure Module (100 bar)
Fluke 700P29Ex Gauge Pressure Module (200 bar)
Fluke 700PA4Ex Absolute Pressure Module (1000 mbar)

Measurement Accuracy
Pressure	Fluke 718Ex 30G Range: Resolution: Accuracy: Functions:	-830 mbar to 2 bar (internal sensor) Over pressure: 3x FS 0.0001 bar 0.05% FS Zero, Min, Max, Hold, Damp Note: for use with non-corrosive gasses
Pressure	Fluke 718Ex 100G Range: Resolution: Accuracy: Functions:	-830 mbar to 7 bar (internal sensor) Over pressure: 2x FS 0.001 bar 0.05% FS Zero, Min, Max, Hold, Damp Note: for use with non-corrosive gasses
Pressure	Fluke 718Ex 300G Range: Resolution: Accuracy: Functions:	-830 mbar to 20 bar (internal sensor) Over pressure: 375 psi, 25 bar 0.0001 bar 0.05% FS Zero, Min, Max, Hold, Damp Note: for use with non-corrosive gasses
Pressure	Fluke 718Ex series Range: Resolution: Accuracy: Functions:	via pressure module connector 29 pressure modules, 2.5 mbar to 700 bar Over pressure per pressure module specs Per pressure module specs To 0.025% of full span, per pressure module specs Zero, Min, Max, Hold, Damp Note: media compatibility per pressure module specs
Pressure	Source Pressure, built in pump Range: Note:	-820 mbar to full scale Supported Pressure Units PSI, in. H2O (4 °C), in. H2O (20 °C), kPa, cm H2O (4 °C), cm H2O (20 °C), bar, mbar, kg/cm², mmHg, in Hg
Environmental Specifications
Operating Temperature	-10ºC to 55ºC
Storage Temperature	-40ºC to 60ºC
Humidity (Without Condensation)	95% (10ºC to 30ºC) 75% (30ºC to 40ºC) 45% (40ºC to 50ºC) 35% (50ºC to 55ºC)
Operating Altitude	3,000 m max
Safety Specifications
Safety	ATEX II 1G Ex ia IIC T4 compliant CSA Certification I.S. Class I, Div 1 Groups A-D , T4
Mechanical & General Specifications
Size	216 mm L x 94 mm W x 66 mm H (with holster)
Weight	Approx. 992 g (with holster)
Warranty	Three years, one year for pump
Shock	1 meter drop test
Vibration	Random, 2 G, 5-500 Hz
Battery type	One 9-volt alkaline battery ANSI/NEDA 1604A or IEC 6LR619V Battery life: 4 to 20 hours, depending on functions used