| |
| | |
|
AMETEK® JOFRA™ Temperature
Pressure
Signal
|
If you ever thought about having the best equipment available and didn't really know what the best is, then this page is for you. By chance, if you already know that Jofra™ stands for quality, reliability and simply the best, then you can understand why “Glanford Electronics” has been appointed distributors of their high quality products.
Throughout the range of equipment that Ametek® – Jofra™ manufacture, each item goes through a rigorous test procedure to ensure that high quality is maintained.
There is a wide range of temperature, pressure, and calibration products, with software to enhance your records at any level.
What ever your needs, “Glanford Electronics” can supply the advice and equipment to bring your testing and calibration procedures up to the high level you may have thought unattainable.
Please contact us and see what the Jofra™ range can offer for you.
|
AMETEK® JOFRA™
HPC 400 Handheld Pressure Calibrator
The HPC400 series is a true calibrator, a field instrument designed for
easy and reliable check and calibration of pressure. Use the HPC400
series in process control applications such as verification or calibration
of pressure gauges, transducers, transmitters, pressure switches, and
safety valves.
The HPC400 series is recognized for its high quality and carefully selected
time-saving features making calibration tasks easy to perform. All relevant
information is shown in the large multi information display at once,
such as: 15 different pressure units, transmitter mA reading, min/max
recording, peak reading, and semiautomatic pressure switch test finding
the closing, opening and hysteresis pressure (deadband), and 5 user
specified setups for frequent measurement/calibration jobs.
| | | |  Specifications & Data
Features
Pressure ranges
- HPC400-2C Vacuum to 2 bar / 30 psi
- HPC400-7C Vacuum to 7 bar / 100 psi
- HPC400-20C Vacuum to 20 bar / 290 psi
Transmitter loop features
- Transmitter loop measurement, 24 volt DC loop supply and HART® resistor.
Ready-to-use systems
- The HPC400 is available as a complete system or as an independent instrument.
- The systems are ready for use, complete with calibration pump, hose, fittings and a convenient hard case to store the complete system.
- Instrument only available in 3 versions on our webshop
For additional system options please telephone with your requirements
|
AMETEK® JOFRA™
HPC500 Handheld Pressure Calibrator
JOFRA HPC500 calibrators feature deadweight tester accuracy in a modern digital package. The HPC is available as an independent calibrator or in one of 6 ready-for-test systems that are complete and equipped to meet any need for pressure calibration.
The HPC500 may be used in a very broad range of applications from simple tool type jobs to complex calibration jobs in custody transfer systems.
The JOFRA HPC500 calibrators introduce a new generation of AMETEK handheld pressure calibrators. This series has been designed to meet high accuracy pressure calibration applications and faciliate your tasks.
The HPC offers features such as user configurable information display, 15 different pressure units, transmitter supply, mA input, % error calculation, voltage measurement, serial communication, and external pressure module capability. The accuracy of the HPC500 calibrators is specified in % of reading to ensure an even better accuracy and wider applicable pressure range. The HPC is temperature compensated from 0 to 50ºC / 32 to 122ºF for on-site operation. It is a truly superior pressure calibrator for laboratory and field use, bringing laboratory accuracy into the field.
The JOFRA APM series of pressure modules extends the application base of the HPC calibrators by allowing calibrations in additional ranges.
The APM modules are compatible with several other JOFRA calibrators.
| | | | Specifications & Data
Features
Wide pressure range
- 16 pressure ranges, ranging from 25 mbar (0.35 psi) to 700 bar ( 10,000 psi) F.S.
- Absolute, differential and gauge sensors.
High accuracy
- ±0.025% of reading +0.01% F.S.
True field calibrator
- Fully temperature compensated
Single or dual sensor versions
- Select HPC500 single or HPC502 dual range calibrators and eliminate the need for 2 separate calibrators.
Full set of intelligent features
- Whole selection of useful functions and features.
- Damping, leak test, % error calculation, min/max, switch test, etc.
Thermometer
- High accuracy thermometer, Pt100 sensor.
External Pressure Modules
- More than 60 different pressure modules, accuracy up to 0.01% F.S.
|
AMETEK® JOFRA™
HPC600 Handheld Pressure Calibrator
The JOFRA HPC600 calibrator features a built-in electrical pump system for generation of pressure and vacuum by a touch of a single key!
Besides the unique pump system, the HPC600 offers a complete choice of features and functions making it an ideal tool and calibrator.
A true multifunction solution designed to save time, money and space HPC600 is a pressure indicator, a pressure calibrator, a complete mA loop calibrator, including 24 volt supply, a voltmeter, a thermometer and a pressure/vacuum generator. All supplied in a ruggedized housing with an easy intuitive operating system in the palm of your hand.
The HPC600 is delivered as a ready-to-test system, complete with hose, fittings, and a padded soft case, equipped to meet any need for pressure calibration. An international traceable calibration certificate, including vacuum and electrical parameters is part of the standard delivery to make the HPC600 a truly ready-to-use solution.
The HPC600 can be used in a very wide range of applications from simple tool type jobs to complex calibration jobs in custody transfer systems. A time and money saver!
HPC600 is a multifunction tool designed to meet high accuracy pressure calibration applications. The HPC600 offers features such as a user configurable information display, 15 different pressure units, transmitter supply, mA input/output, % error calculation, voltage measurement, serial communication, and an external pressure module capability. The accuracy of the HPC600 calibrator is specified in % of reading to ensure an even better accuracy and more applicable pressure range. The HPC600 is temperature compensated from -10 to 50ºC / 14 to 122ºF for on-site operations. It is a truly superior pressure calibrator for laboratory and field use, bringing laboratory accuracy into the field.
The JOFRA APM series of pressure modules extends the application base of the HPC calibrators by allowing calibrations in additional ranges. The APM modules are compatible with several other JOFRA calibrators.
| | | | Specifications & Data
Features
Pressure ranges
- HPC600-2A 0 to 2 bara / 30 psia
- HPC600-2C Vacuum to 2 bar / 30 psi
- HPC600-10A 0 to 10 bara / 150 psia
- HPC600-10C Vacuum to 10 bar / 150 psi
High accuracy
- ±0.020% of reading +0.015% F.S.
True field calibration
- Fully temperature compensated
Unique built-in electrical pump
- HPC600 has a built-in automatic pressure system, based on an electrical pressure and vacuum pump.
Complete 4-20 mA loop calibrator
- HPC600 features a complete mA loop calibrator with all common loop calibrator features: measure, source & sink mA, and supply 24 volt for transmitters.
Comprehensive set of features
- Wide selection of useful functions and features. Damping, leak test, error calculation, min/max, switch test, etc.
Thermometer
- High accuracy thermometer, Pt100 sensor.
External pressure modules
- More tham 60 different pressure modules, accuracy up to 0.01% F.S.
|
|
AMETEK® JOFRA™
IPI Pressure Indicator
|
This series is designed to meet your pressure measurement applications and make the tasks easier. The IPI offers 18 different pressure units, long battery life, high accuracy, and even serial communications. The accuracy of the IPI rivals that of a pressure calibrator and is temperature compensated for shop or in process applications. This versatile unit is available as a stand alone indicator, in a complete test system, and can be attached to M&G diaphragm seals for true in process applications.
| | | |
In-process indicator
You can use the IPI as your in-process pressure indicator. The IPI is an optimal device for this application. You can select the sampling rate to extend your battery life; or use the external power supply option to allow for continuous readings without the need for battery replacement. The IPI can be easily mounted to M&G diaphragm seals to meet 3-A regulations or to prevent a hazardous process from affecting the sensor. There are several different seal designs and sizes available to meet your application.
|
AMETEK® JOFRA™
IPI System A
This system includes the JOFRA IPI indicator together with one of the following pneumatic hand pumps: T-730, T-740 or T-750, depending on the chosen pressure range and options. System A is an easy-to-use single-hand operated test system.
The System A comes in a protective carrying case with cutouts for fittings, hose, and the complete assembled test unit - no time is required to assemble the unit every time you need it. The indicator can at any time be used separately for other pressure test tasks. A swivel fitting between the pump and the indicator makes it possible to to adjust the indicator for easy viewing.
- 0 to 15 psi (1 bar)
- 0 to 30 psi ( 2 bar)
| |
- 0 to 100 psi (7 bar)
- 0 to 300 psi (21 bar)
|
|
AMETEK® JOFRA™
IPI System B
This system includes a dual function pneumatic hand pump. With this pump you can generate both vacuum and pressure for your applications. It takes just a few seconds to switch between vacuum and pressure, just push one button (valve) on the T-930 handpump.
The System B comes in a protective carrying case with cutouts for fittings, hose and the complete assembled test unit - no time required to assemble the unit every time.
- Vacuum to 300 psi (21 bar)
- Vacuum to 500 psi (35 bar)
|
AMETEK® JOFRA™
IPI System C
This system consists of an IPI indicator together with a hydraulic, high pressure hand pump T-620 or T-620H, which features an oil reservoir to prime the system. System C is an easy-to-use single-hand operated test system. No need for a flat surface (table) to operate the system. The system includes release valve and vernier valve for fine adjustment to enable safe and simple operation of the pump.
- Vacuum to 500 psi (35 bar)
- 0 to 1,000 psi (70 bar)
| |
- 0 to 2,000 psi (140 bar)
- 0 to 3,000 psi (200 bar)
| |
|
|
AMETEK® JOFRA™
IPI System D
This system consists of an IPI indicator together with a rugged, hydraulic, high pressure screwpump.
System D is an easy-to-use test system. Place the pump on a flat surface and turn the handle to generate pressure. You can adjust the indicator to fit the best viewing angle. The system includes a manifold for connection of the test device, a fine adjustment vernier valve (optional), and a reservoir for extra oil or water (optional).
The System D comes in a protective carrying case with cutouts for fittings and the complete assembled test unit - no time adder to assemble the unit every time. Easy and fast connection between pump and indicator makes it easy to use the pressure calibrator separately for other pressure test tasks.
- Vacuum to 500 psi (35 bar)
- 0 to 1,000 psi (70 bar)
| |
- 0 to 2,000 psi (140 bar)
- 0 to 3,000 psi (200 bar)
| |
|
|
AMETEK® JOFRA™
IPI System E
This system consists of an IPI indicator together with a rugged, hydraulic, high pressure pump. System E is an easy-to-use test system. The hydraulic pump makes it very easy to prime the system. You can adjust the indicator to fit the best viewing angle. The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard.
The System E comes in a protective carrying case with cutouts for fittings and the complete assembled test unit - no time adder to assemble the unit every time. Easy and fast connection between pump and indicator makes it easy to use the pressure calibrator separately for other pressure test tasks.
- 0 to 1,000 psi (70 bar)
- 0 to 2,000 psi (140 bar)
| |
- 0 to 3,000 psi (200 bar)
- 0 to 5,000 psi (350 bar)
| |
- 0 to 10,000 psi (700 bar)
|
|
AMETEK® JOFRA™
IPI System F
System F is an easy-to-use test system. The hydraulic pump makes it very easy to prime the system. The pump contains 75 in3 / 1.23 l of liquid.
The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard. The System F comes in a protective carrying case with cutouts for fittings. Easy and fast connection between pump and calibrator makes it easy to use the pressure calibrator separately for other pressure test tasks.
- Vacuum to 500 psi (35 bar)
- 0 to 1,000 psi (70 bar)
| |
- 0 to 2,000 psi (140 bar)
- 0 to 3,000 psi (200 bar)
| |
- 0 to 5,000 psi (350 bar)
- 0 to 10,000 psi (700 bar)
|
|
|
